Jacquard Inkjet Silk

Instructions

This document is also available in printer friendly PDF format:
| Inkjet_Fabric_Instructions.pdf

These sheets are paper backed so that they will easily go through your inkjet printer. They are not transfer paper and do not contain any sort of adhesive. To adhere the fabric to your project you can sew or use a fusible bonding material such as Stitch Witchery, Fus-O-Bond, or Wonder Under Craft depending on the surface you are adhereing to.

Steps:

1. Before you print onto your fabric sheet, run a test on paper to check for orientation and alignment of your image. You may also want to change your printer settings to get the most ink onto the fabric as possible up to the point of bleeding. This way you will get a more saturated image. Every printer is different so it is a good idea to test different settings.
2. Load one sheet of Jacquard Inkjet Silk or Cotton at a time and print your image.
3. Peel the fabric from the paper backing.
4. Let dry for 24 hours if item is to be washed. Hand wash with cool water and light soap.
5. Your printed fabric is now ready to use!