Products

Print Base Kit

The Print Base Kit includes: Calgon, Urea and Ludigol. These chemicals are packaged in the correct proportions so only water needs to be added to make chemical water. Sodium Alginate thickener is also included, but packaged separately, to thicken the dilutant for hard edge painting or silk screening. All of these chemicals are also sold separately.

Sizes
1 qt/.95 L (CHM1013)
1 gal/3.79 L (CHM2013) pictured

Instructions

1 qt/.95 L
To make chemical water:
- Dissolve Print Base Kit in ¾ qts/.71 L boiling water. Add hot tap water to make 1 qt/.95 L.

To thicken (for painting or screen printing):
- Slowly sprinkle Sodium Alginate over chemical water. Stir constantly for 10 minutes or use a studio blender. Amount added to chemical water controls the degree of thickness.

1 gal/3.79 L
To make chemical water:
- Dissolve Print Base Kit in 3 qts/3 L boiling water. Add hot tap water to make 1 gal/3.79 L.

To thicken (for painting or screen printing):
- Slowly sprinkle Sodium Alginate over chemical water. Stir constantly for 10 minutes or use a studio blender. Amount added to chemical water controls the degree of thickness.